How to use Oxygen Mask
Author: Lily Time:2021/12/29
Baili Medical Suppliers(Xiamen) Co., is a professional medical devices supplier based in Xiamen, China. Our main products: Protective Equipment, Hospital Equipment, First Aid Equipment, Hospital and Ward Facilities.
The Method of use Oxygen Mask
(1) Prepare the necessary items required for the oxygen mask, carefully check the bed number and name, clean your face and hands before operation, wear a mask, tidy your personal clothing, and prevent wearing items from falling off.
(2) Install an oxygen meter after the inspection and test whether it is unblocked at the same time. Install the oxygen core, install the humidification bottle, and check whether the equipment is stable and in good working condition.
(3) Check whether the date of the oxygen inhalation tube is within the warranty period. Check for signs of air leakage and ensure that the oxygen tube is in good condition. Connect the oxygen inhalation tube to the humidifying bottle to make sure the connection is stable, and at the same time turn on the switch to adjust the oxygen flow.
(4) Check the oxygen pipe again to test whether it is unblocked and leak-free. Check if there is any moisture at the end of the oxygen tube. If there are drops of water, wipe it dry in time.
(5) Connect the oxygen tube and the head mask, and make sure that the connection is intact to ensure that there will be no problems in the working state. After the check is correct, put on an oxygen mask. With a face mask, the tightness and the comfort of the nose clip should be adjusted.
(6) After putting on the oxygen mask, record the time and flow of oxygen inhalation in time, and make careful rounds to observe the state of oxygen inhalation for abnormal performance.
(7) When the oxygen use time reaches the standard, stop oxygen in time, remove the mask, turn off the flow meter in time, and record the stop oxygen time.