Product Description

The Anesthesia machine is through the mechanical circuit to the anesthetic into the alveoli of the patient, the formation of anesthetic gas partial pressure, disseminated to the blood, the central nervous system directly inhibitory effect, thus producing the effect of general anesthesia. Anesthesia machine belongs to semi-open anesthesia device. It is mainly composed of anesthesia evaporation tank, flowmeter, folding bellows ventilator, breathing circuit (including suction and expiratory one-way valves and manual air bag), corrugated pipe and other components.

Product Detail

1. Product Introduction of The Anesthesia Machine

The Anesthesia machine is portable and applicable, which can directly use air and oxygen as carrier gas, and can carry out auxiliary breathing and controlled breathing to meet various surgical requirements.

Here's how it works: After the patient is induced, the air anesthesia machine is connected to a closed mask or endotracheal tube. During inhalation, the anaesthetic mixture enters the patient through an open suction valve; On exhalation, the exhalation valve opens, while the inspiratory valve closes, exhaling the exhaled air. Folding bellows are available when assisted or controlled breathing is used. Press down on inhalation and pull up on exhalation to ensure adequate ventilation for client. At the same time, the ether switch is adjusted according to actual needs to maintain a stable level of anesthesia.

2. Product Parameter (Specification) of The Anesthesia Machine

Part of Anesthesia
Product Name The Anesthesia machine
Main body High-strength engineering plastic rack, light, beautiful
and corrosion resistant
Scope of application adult, child
Gas source O2: 0.28~0.6MPa N2O: 0.28~0.6MPa
Flow meter O2 : 0.05~10L/min N20: 0.05~10L/min
O2 N2O linkage and N2O Stopper When using nitrous oxide, oxygen concentration>25%;
When the oxygen pressure<0.2Kpa, the flow of nitrous
oxide would be cut off.
Flow rate of rapid oxygen supply 25~75L/min
Low oxygen pressure alarm There will be sound alarm when the oxygen pressure
< 0.2MPa
Vaporizer It has the function of automatic compensation based on
pressure, temperature, and flow rate. The regulation
range of evaporator concentration is 0~5 vol%. Among
Halothane,Enflurane, Isoflurane and Sevoflurane, one
can be chosen for application as required by the
customer. And vaporizers that are imported with original
packaging are also available.
Respiratory circuit working mode: all-close, semi-close, semi-open
APL≤12.5 kPa
Respiratory Bellows bellows for adults, tidal volume range:0~1500 ml
bellows for children, tidal volume range:0~300 ml
anyone can be chosen for application as required by
the customer
Display mode High-definition 5.7” LCD screen display

3. Product Feature And Application of The Anesthesia Machine

When using a The Anesthesia machine, it forces the anaesthetic mixture into the patient's circuit and respiratory system to receive both exhaled and fresh air. The anesthesiologist can adjust the tidal volume, respiratory rate, inhalation/exhalation ratio and minute ventilation according to the patient's condition. Adjust the ventilation pattern to meet the various needs of the patient

4. Product Details of The Anesthesia Machine

5. Product Certification of The Anesthesia Machine

Company Certification

Company Profile

Company Exhibition

6. Deliver,Shipping And Serving Of The Anesthesia Machine

Shipping Method Shipping Terms Area
Express TNT /FEDEX /DHL/ UPS All Countries
Sea FOB/ CIF /CFR /DDU All Countries
Railway DDP/TT Europe Countries
Ocean +Express DDP/TT Europe Countries /USA/Canada/Australia /Southeast Asia /Middle East

7. FAQ of The Anesthesia Machine

Q:Are you a trading company or a manufacturer?

R:We are a professional manfacturer and we have export service company.


Q:Can I have some samples before bluk order? Are Samples free?

R:Yes! We can send some samples. You pay the sample cost and freight.We return the sample cost after bluk order.


Q:What is your MOQ?

R:MOQ is 1000pcs.


Q:Do you accept trial order?

R:Yes! We accept the trial order.


Q:What is your payment term?

R:We accept Alipay,TT with 30% deposit.L/C at sight, Western Union.


Q:How long is your delivery time of The Anesthesia Machine?

R:Usually 20-45days.


Q:Do you have ODM and OEM service?

R:Yes, Logo printing as customer's design sticker, hangtag ,boxes,carton making.


Q:You have sales target finished amount requirement to the distributor?

R:Yes! We can be our distributor when you order is over $30000.00.


Q:Can I be your agency?

R:Yes! The sales target finished amount is $500000.00.


Q:Do you have office Yiwu, Guangzhou, Hongkong?

R:Yes! We have!


Q:Which certificate do your factory?

R:CE, FDA and ISO.


Q:Will you will attend the fair to show your products?

R:Yes, we also can camera with you when you need.


Q:Can I delivery the goods from other supplier to your factory? Then load together?

R:Yes! We can do that.


Q:Can I transfer the money to you then you pay to other supplier?

R:Yes!


Q:Can you do CIF price?

R:Yes, pls supply the destination to us.We will check the shipping cost to you.


Q:How to control the quality?

R:After order is confirmed, we have a meeting with the all dept. before production, investigate all the workmanship and technical details, make sure all the details are under control.


Q:What is your nearest port ?

R:Our nearest port is Xiamen,Fujian, China.

Products Categorys

Featured Products

Navigation